Belt conveyor installation and maintenance

A belt conveyor installation
1, the installation of a belt conveyor rack rack rack installation is started from scratch , feeder breaker and then install the sections sequentially intermediate frame , the final

installation of the tailstock . Before installing the rack , the first full length of the conveyor pulling centerline , because the centerline to keep the conveyor belt in a

straight line is positive

Important condition for normal operation , so the apron feeder installation of the rack sections , must be aligned with the center line , but also airs leveling rack to the center line of

the allowable error , the captain of per meter ± 0.1mm. However, the entire length of the conveyor frame centered on the error should not exceed 35mm. When all the single

security

After setting and identify , you can connect each single .
2, the installation drive Installation drive , you must pay attention to the belt conveyor belt conveyor drive shaft and perpendicular to the centerline , the width of the drive

roller conveyor centerline central and coincides with the axis of the shaft line reducer parallel . Also, all shafts and rollers are

Should be leveling. Axis horizontal error , according to the width of the conveyor , allowing the range of 0.5-1.5mm . Driving means installed at the same time , the tail wheel

, etc. can be mounted tensioning device , the tensioning device of the axis of the drum , should be perpendicular to the centerline of the belt conveyor .
3, the installation of roller rack , gear and tensioning device after installation , you can install the upper and lower idler roller frame , so that the belt has a slow change

to the curved arc , bending section of the roll cage prop prop pitch as normal roller frame pitch 1/ 2 to 1 /3. Idler installation, you should make it light and flexible

rotation

.
4, and then fixed on the basis of the rack or floor . After a fixed belt conveyors can be fitted to the loading and unloading devices.
Second, the maintenance of belt conveyors
During operation , the conveyor belt in order to ensure reliable operation, the most important is to detect and eliminate possible failures . This operation must always observe

the work of transport , such as abnormal should timely manner. The best safeguard is the usual maintenance , human

Members of the regular operation. Not illegal to use , in accordance with the operating procedures to run. So you must be on the mechanical equipment operating personnel with

the necessary training , so as to effectively avoid the mistakes !