How do aggregates production line equipment prepared before operation

 Aggregate production line high degree of automation, low running costs, crushing equipment rate, energy saving, large output, less pollution, easy maintenance, to produce sand meet the

national standard construction sand, particle size were, uniform grain shape is good, with reasonable level. However, in a good machine in the boot before running a very

important job is running before the inspection. How do today introduced aggregate production line equipment operation preparatory work before.

First, you should check aggregates production line equipment lubricant tube is connected securely, pre-commissioning should be re-added once the oil, add Mobilube lubrication

premium or 3 # lithium grease; checking aggregates production line equipment, motor wiring is correct, voltage is normal ( normal voltage 380 V); Check the component connection,

should be solid and reliable, carefully check the impeller for foreign objects, if any should be excluded. Furthermore belt is installed before you start the motor rotation

direction signs should be consistent with the Screening machine (ie from the feed port to see the impeller rotates counterclockwise) if the signs in the opposite direction, the motor

wiring should be adjusted so that rotation and signs in the same direction, and never allow rotating in opposite directions; For dual motor drive, spindle assembly with both

sides of the motor, respectively, with the same number of triangle belt and spindle assembly is connected to both sides of the triangle belt tensioning and should be adjusted to

the same straight . Final. After checking, the transfer of stone production line equipment before the first stone production line equipment empty load and load test, the test

confirmed that no problem and then handed over production.