Double roll crusher-roll rules

Here I will introduce specific double roll crusher (also called the roll crusher) operating procedures:

Turn the machine through a trial move fully qualified before allowing formally put into production, in order to ensure long-term safe operation of the machine, you should pay

particular attention to the machine was operating properly fit routine maintenance and periodic maintenance.
(A) Preparation before operation of the machine:
The machine starts normally before fully prepared to work and strict inspection work on the machine itself requires each component must be intact, and all the fixing bolts and

ground pin nuts should be tightened securely, machine attachments without any obstruction running things and miscellaneous thereof.
(Two) driving and parking order:
After the preparation and inspection work in full compliance with the requirements, you can start the mobile crushers for sale, the machine speed until the machine during normal feeding, feeding

must be uniform, parking should stop feeding the machine, until no remaining material inside the hopper before stopping machine operation.
(Three) the normal operation of the machine:
When the normal operation of the machine, the machine operator and the officer must note the following:
1, all bolts have broken off and are loosening.
2, each bearing lubrication is normal, without overheating.
3, the seal is tight everywhere, with or without leakage.
4, the feed rate for excessive phenomenon, the particle size to meet the requirements.
5, the roll and the gear is properly functioning.
(Four) Other notes:
One can not change the direction of rotation of the machine.
2, the machine During power outages, immediately pull off the power supply to avoid accidents caused by sudden call.