Use pre-inspection requirements shaker

1, before the start of the security check has removed plywood.
2, check all parts are securely locked:
 A, check the Screening machine grid on the screen surface ZKX type mine sand vibrating screen is pressed.
 B, check the rubber pad with sieve and rack connections.
 C, check the vibrating motor with sieve connections.
3, check the vibrating gridiron motor:
 A, check the power supply voltage
 B, check the vibrating motor interlock control devices.
 C, remove the motor cover and check the segments mine shaker relative phase angle is consistent with the segments tighten the fastening screws.
 D, two motor mounting angle should be consistent.
4, feeder
 A, tighten the gate.
 B, check the thermal mineral shaker inlet and outlet hose connections are sealed, but not too tight, otherwise it will twist in the sieve body movement break.
5, no-load test
 A, test, the sieve with the rack may not have collision or other unusual sounds.
 B, check the amplitude sieve for reciprocating linear motion may not have distorted and other irregularities.
 C, running 10-15 minutes, use a wrench tighten the cold mine shaker drive mechanism bolts used.