How to maintain mining machinery

Mining machinery costs are too high, so we bought the equipment properly maintain it so that life can be longer mining machinery, contain all harmful factors.
First, to reduce the impact of mechanical dust
Mining machinery dust generally refers to the daily work generated dust, debris and other non-metallic materials, soil material and mining machinery manufacturing some of the

metal shavings, wear debris, etc. Once the debris inside machinery and equipment, with the arrival of machinery between the surface, the harm is great, not only block out the

relative motion, will accelerate the wear and tear of parts, and will scratch the mating surface, destroying oil mill, prompting parts coal crushing plant temperature, lubricant deterioration Jaw

Crusher . Therefore, for mining machinery working environment, a quality to be used, and the supporting parts and lubricants, greases, blocking harmful substances at source. The

second is to do a good job-site mechanical protection role in ensuring that the various parts of mining machinery to work properly, prevent all kinds of debris into the

machinery inside, resulting in poor mechanical damage of mechanical failure, try to go to the regular maintenance of plant repair, on-site repair, must be prepared to work to

prevent parts repair site into mechanical components pollution.
Second, to reduce the effect of temperature
In operation, the temperature of each individual component has the normal range, such as, the general temperature of the cooling water are generally in the 80-90 ℃, the

hydraulic system is generally at 30-60 ℃, below or exceeds the zero will cause Parts of accelerated wear, causing oil deterioration, resulting in changes in the material

properties of the small ball mill, etc.,
For this reason, in the course of mining machinery, a low temperature to prevent overload, low pre-heating stage to ensure the normal operation of the mechanical reach the

required temperature before for traveling or working, not because it was not a problem while ignoring its important role; Second, we must prevent the mechanical operation at

high temperatures, mechanical operation process should always check the value on a variety of thermometers, found the problem immediately shut down for inspection, found fault

immediately removed. For unable to feeding equipment a reason, absolutely can not treated and still make mechanical work sick crusher. In the usual work, pay attention to check the cooling

system is working. For water-cooled machines, must be checked daily before work, add cooling water; pair of air-cooled machines, but also regularly clean the dust on the air

cooling system to ensure smooth flow of cooling air duct on the roll break.
Finally reduce all kinds of corrosion
Metal surface and the surrounding medium chemical or electrochemical action destroyed the phenomenon known as corrosion. Such corrosion will not only affect the mechanical

appearance of the device's normal work, but will corrode to the mechanical parts inside the classifier. Such as rain, airborne chemical substances through the mechanical parts

of the external channel, cracks, etc. into the internal machinery, mechanical parts internal corrosion, accelerated mechanical wear and increase mechanical failure. Because of

this corrosion is sometimes invisible, intangible, easily overlooked panties, and thus greater danger crusher. In use, management and operations staff to the prevailing local

weather conditions, air pollution, and take effective measures to reduce the impact of chemical corrosion on the mechanical, the focus is to prevent rain and airborne chemical

composition of the intrusion of mining machinery.