Screening machine for maintenance to be equipped with safety devices

        Screening machine operation, according to need, with l0Ot press, the eccentric shaft, gears, bearings and the inner pressure. In many structures, the use of hydraulic

pump, the high-pressure oil into the shaft and the bearing inner ring with the surface, and bearing puller, remove the bearing inner ring. This

Point and double-roll crusher is sand vibrating screen somewhat different. From top to bottom on the housing, with the press or with copper Remove the bearing outer ring, be careful not to damage the

bearing housing bore.
  
        Beneficiation process in open vibrator, all parts should be numbered or marking. Vibrator bearing assembly, according to the reverse order of disassembly. Assembled

bearing outer ring, pay attention to the most outer shaft and the housing end bearing bore distance and fold open the front consistent. And

Shaft with the bearing inner ring and related parts, to assemble in oil heated more convenient. Vibrator assembly is completed, the need to maintain 1 ~ 2mm axial clearance

volume. Replacement bearings must be installed in pairs, shall not be mixed. All seals must be installed as is. Installed ventilation hood, heavy

New injection of new lubricants.

        Linear vibrating screen screening machine use and maintenance must comply with the general rules of safety technology. In the screening machine during operation, the

prohibition of any repair work on the Screening machine; parking in the screening machine for repair, open circuit knife switch, knife switch and quoted,

Description ongoing repairs, prohibit start screening machine. Transmission V-belts and pulleys, tire coupling, security guards must be installed. When you want detailed

inspection or repair screening machine, you can remove the protective cover, but the screening machine before starting, you must Kaoru reattach the protective cover.