2013年9月4日星期三

Crusher installation steps is what

Crusher installation steps :

    1 Crusher ( Crusher ) with a vibration pump work crew , before the installation and commissioning of the fasteners should be tightened up all in the production operation

should also be checked regularly , Belt feeder always tighten.

    2, the installation should pay attention to back-breaking rotation ( marked on the pulley rotation arrow ) irreversible.

    3, the motor is installed after the break up should be based on installation , with belt guard.

    4, the back plate and the plate hammer clearance should work to gradually transfer small , the adjusted number of weight feeder hand to rotate the rotor rpm to check for impact. After

adjustment, the locking sleeve nut should prevent the back plate by loosening the nut after vibration gradually decreased collide with the plate hammer , causing the accident.

    5, due Crusher ( Crusher ) a discharge opening in the lower mounting height and how to feed , a feeding device with , should be considered in the system design is good .

没有评论:

发表评论