On care and maintenance of test sieve

Standard test sieve in the care and maintenance on what should pay attention to what point ? The following five aspects can not be ignored :

A vibration motor running process, we belt weigh feeder must pay attention to bearing lubrication under normal operating conditions, tired
Total operating 1600 hours or so , replace the bearing grease and clean the bearings, bearing chamber , bearing gland .
2, the motor park six months or a longer period of time , care should be demolished and replaced grease. Should banana screen be measured prior to use
Amount stator coil insulation resistance to ground , when measured with 500V megger insulation resistance of not less than 20 megohms .
3, the motor total running time over 5000 hours , the response to bearing checking , if damaged, replace with new bearings . Foot bolts should be used 8.8 filament strength

bolts and nuts with a non-return or spring lock washers to prevent loosening.
4 vibration motor should be reliable , securely mounted on the vibrating device ;
5 , when used, should be regularly to the vibrating motor fuel and replacement of motor bearings, once every two months plus lead and disulfide grease , hot season plus one

month , six months once the motor repair and replace bearings.