Learn belt conveyor machinery safety during operation

Belt conveyor machinery safety procedure is as follows:
1 Several mechanical conveyor running series , we should begin the discharge end , the sequence starts. All normal operation only after the feeding .
2 Run the tape deviation phenomenon occurs , you should stop adjustment shall not be reluctant to use , so as not to wear edges and increase the load .
3 conveyor prohibit pedestrians or by people .
4 working environment and sent the material temperature not higher Coal vibrating screen than 50 ℃ and below -10 ℃. Shall not be transported with a pH of oils and organic solvents constituent

materials.
5 conveyor motor must be well insulated . Mobile conveyor cables do not Luanla and dragging . Motor must be grounded reliably .
6 must be stopped before stopping feeding, unloading and other material on the belt to make deposits before parking .
7 belt conveyor installation method should be required to install a fixed basis. Mobile conveyor official before running wheels should live or with a triangular wedge brakes

stopped . In order to avoid the work place to move around. How conveyor parallel Mobile crushing plant operation, the machine and the machine between the machine and the wall of the

Should be one meter between the channels.
8 belt slipping a hand to pull the belt is strictly prohibited , so as to avoid accidents.
9 -load belt conveyor machinery should start . Other operating normally before feeding . Prohibits driving after the first feeding .
10 transport machinery must be inspected prior to use part of the operation , the tape fastener and bearing device is normal , protective equipment is complete. Tape tensioner

degrees required before starting to adjust to the appropriate level.